These 0-5K throttle potentiometer boxes are suitable for many of the above controllers. We generally stock the 3-wire as it can always be used as a 2-wire. The boxes are constructed of stainless steel and come with drilled stainless levers with either 2-wire or 3 wire outputs. The 3-wire version can be used as a 2-wire by choosing the wiper wire and either of the other wires for 0-5K or 5K-0 operation as required. Just use a test meter to determine which wire is the wiper, and which is the high or low end of the potentiometer, the wire colours sometimes vary. A useful NC or NO microswitch is included which switches on or off at start of the lever's travel, as required.

Suitable for many controllers. Easily connected to a throttle cable with a clevis and pin or nut and bolt in any of the four hole positions on the lever.

Dimensions (approx):

Length 102mm

Width 62mm (excluding lever)

96mm (with lever)

Height 50mm (body) - 52mm with screw heads

Lever Arc is 45 degrees +/- (approx)